FAQ's

Frequently Asked Questions

Q: How does it work?

A: The actual process is called electrolysis. The O2 Grow emitter carries a positive charge on one screen and a negative charge on the other. Once placed in the water, the emitter electronically separates the water molecule into bubbles of hydrogen and oxygen. The larger hydrogen bubbles float up and dissipate into the air and the tiny bubbles of oxygen are so small they cannot break the surface of the water and are  reabsorbed back into the water, effectively increasing the DO saturation level.

Q: Is there a warranty?

A: All products carry a One Year Warranty against defects excluding the emitters. The emitters have an end of life cycle at 1600 hours of use. Refer to the videos on the website for more details regarding emitters and regular maintenance. Any defective product will be replaced with proof of purchase within one year of purchase.

If you need to make a return, please contact customer service at 952-474-5820 or email – info@o2grow.com, within 30 days of purchase date. Customer service will provide you an RMA number (Return Merchandise Authorization) and instructions. All refunds will be provided as a credit to the credit card used at the time of purchase within five (5) business days upon receipt of the returned merchandise.

Q: If there is electricity, can I get shocked?

A: There is no risk of getting shocked. The power supply is UL approved and current limiters will only let the emitters only draw 1 Amp of power maximum.

Q: What if I am using reverse osmosis (RO) water?

A: RO water is a great baseline for starting, however, it does not have any electrolyte in it. The emitters need some electrolyte for conductivity in the water. Adding nutrient to the water first will create the bubbles.

Q: Any negative effects from the hydrogen gas escaping from the water?

A: The amount of hydrogen gas released into the air is so small that it is not dangerous.

Q: How much energy does the unit draw?

A: The control units will only draw from 1 Amp – 4 Amps depending on the size of unit you purchase.

Q: How long do the emitters last?

A: The emitters will last more than 1600 hours with normal use, meaning that you only need to run the emitters a few hours per day and that you maintain the emitters by cleaning them with muriatic acid whenever they get buildup from calcium. The screens are coated with iridium and with proper use and maintenance you should be able to even extend the life of the emitter past 1600 hours. You will know when the emitter is at it’s end of life when the emitter is generating significantly fewer bubbles.

Q: 1600 hours does not seem very long?

A: If you run the emitter about 2-3 hours per day, everyday, you should be able to get about 16-24 months use. It’s important to note that once charged, the water will hold it’s oxygen for about 12-24 hours without disruption (meaning, no bubblers and no flow) so you would actually be safe to run every other day and maintain fully saturated water.

Q: Is there a benefit to run this unit 24 hours a day? Will the plants get more oxygen?

A: Water will only hold so much dissolved oxygen. It depends on the type of water, the temperature of the water and any nutrients or other additives introduced into the water. Once the water is fully saturated, it can hold no more and running the emitter longer will not provide any more DO. The best way to check is to have a DO meter and measure the DO ppm.

Q: What is the best way to clean the emitter?

A: Using muriatic acid is an easy way to clean the emitter. Please see our video on Emitter Cleaning. We like to use “The Works” toilet bowl cleaner because you can find it at your local dollar store. The acid can be saved in a container and reused several times. Do not use brushes or abrasive sponges to clean the emitters. Spraying or dipping in the muriatic acid is sufficient. Dipping works best.

Q: Can these units be purchased outside of the US?

A: Yes! You can purchase these units from our online store. We accept many internationally recognized credit cards. If you are having a problem with a credit card, please contact our office and we can get you current information for wire transfer.

All of our units are configured for international use. Please specify which type of power plug you will require at the time of purchase.

Q: Does your product work for 230v overseas?

A: Yes, the power supply is convertible on the 2010, 2020 and 2040 units. The 2120 and 2250 units will need a converter. Please specify your needs when placing your order.

International Power Supply Options
International Power Supply Options